How to Install Stone Coated Metal Tile

Stone Coated Metal Tile can be applied to steel structure roofs, concrete roofs, wooden roofs, etc.; flat roofs, fan-shaped roofs, and vaulted roofs can be easily installed with simple tools, saving your installation time, overall tidy, Generous, practical and widely recognized.

Installation of tile hanging strip:

The tile hanging strip is installed from bottom to top, one tile hanging strip is installed at the cornice, and the second is installed at a distance from one and the other.

Installation of the main tile:

1. The tiles are installed from the bottom to the top, one tile is out of the eaves, and the second tile is installed in sequence to the ridge.

2. Flat head stainless steel or galvanized screws should be used to connect the tiles to the tiles. One tile screw is connected to the tile strip at the groove of the tile, and then the second tile covers one tile and covers it. Drive in from the groove of the lower mouth and fix it with the tile. A tile needs 7 screws, 3 on the bottom and 4 on the bottom.

Installation of the gutter:

The gutter should be installed first, and then the tiles should be installed. When installing the tiles in the gutter, pay attention. The tiles need to be folded down 20mm. When cutting the tiles, they should be evenly aligned. Pre-lay, then snap cut and hem lines.

Installation of the cornice:

The cornice should be installed first, and it is fixed on a tile with screws, and then the tile is covered with screws on the cornice.

Installation of the gable:

The gable should be installed later, the tile should be installed to the side and folded up 30mm, and then the gable should be placed on the tile, and the side and top of the gable should be fixed with screws.